- Top 4 phần mềm ghi âm tốt nhất trên MacOS cập nhật 2019
- Tủ lạnh ngăn đá dưới đầu tiên của Samsung 2018 có gì đặc biệt?
- Tivi OLED của LG – Công nghệ tivi của tương lai
- Cách bật chế độ tiết kiệm điện trên Android tivi Sony
- Nguyên nhân nào khiến laptop của bạn chạy chậm như rùa bò?
- Ngắm nhìn HTC 10 – Flagship mới của HTC
- [Video] Cách làm tương ớt sạch, an toàn cho sức khỏe đơn giản ngay tại nhà
- Cách tải ứng dụng ngoài trên Smart tivi Skyworth bằng file apk (phần 1)
- Lenovo A858T – Smartphone dành riêng cho nữ giới
- Mang điểm thi mua Laptop – Giảm giá 2 lần
Tập tin Flash Firmware MT6765 9.0 cho Tecno Phantom 9 (AB7)
Tải Xuống Firmware/Flash File Chính Thức Cho Tecno Phantom 9:
Nếu bạn sở hữu smartphone Tecno Phantom 9 và muốn tải xuống Firmware chính thức cho nó, hãy làm theo hướng dẫn dưới đây. Trong một số trường hợp khi thiết bị của chúng ta bị brick, thì chúng ta có thể đưa điện thoại trở lại bằng Firmware gốc. Ngoài ra, nếu bạn cảm thấy Tecno Phantom 9 của bạn lag hoặc gặp vấn đề, hãy flash Firmware gốc từ danh sách dưới đây và thoát khỏi tình huống đó. Firmware gốc không hủy bảo hành cho Tecno Phantom 9 của bạn.
Tecno Phantom 9 chạy trên hệ điều hành Android 9.0 được cung cấp bởi bộ xử lý Mediatek MT6765. Đây là một smartphone Dual SIM (GSM) chấp nhận Nano-SIM. Các tùy chọn kết nối bao gồm Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.
Thiết bị đi kèm với 6GB RAM và 128GB bộ nhớ có thể mở rộng qua thẻ SD. Ở phòng chụp ảnh, nó đi kèm với camera sau 16+8+2MP và camera trước 32MP.
Lưu Ý:
– Flash ROM sẽ xóa tất cả dữ liệu cá nhân của bạn bao gồm lưu trữ. Vì vậy, chúng tôi khuyên bạn nên sao lưu hoàn toàn dữ liệu của điện thoại của bạn trước hết.
– Vui lòng thực hiện cẩn thận, chúng tôi không chịu trách nhiệm về bất kỳ thiệt hại nào cho thiết bị của bạn.
– Hãy sao lưu NVRAM trước khi làm bất cứ điều gì.
– Đảm bảo rằng thiết bị của bạn ít nhất có 50% pin trong quá trình flash để ngăn chặn tắt nguồn ngẫu nhiên.
Thông Tin Firmware:
– Tên sản phẩm: Tecno Phantom 9
– Loại: ROM Đầy Đủ
– Dung lượng: lên đến 1.2GB
– SoC: Mediatek MT6765
– Hệ điều hành: Android 9.0
– Mật khẩu: Trống
– Truy cập root: Không
– Gapps: Đã bao gồm
– Phiên bản sản phẩm: AB7-H618A-P-190419V148
Liên kết Tải Xuống:
Công Cụ Flash:
Trình điều khiển:
– Trình điều khiển Mediatek Preloader V-COM tại đây
Cách Cài Đặt Firmware Gốc Cho Tecno Phantom 9:
1. Đầu tiên, tải về và cài đặt Trình điều khiển Mediatek Vcom trên PC của bạn.
2. Tải xuống và Giải nén Công cụ SP Flash trong một thư mục. Chạy SP Flash tools.exe
3. Chọn tab Download, nhấp Scatter và Load Scatter File từ thư mục ROM.
Đó là hướng dẫn hoàn chỉnh để tải Firmware và Flash Thiết bị. Nếu bạn có bất kỳ câu hỏi nào, hãy để lại ý kiến của bạn.
Download Stock Firmware/Flash File Tecno Phantom 9:
Download Official Stock Firmware Flash File For Tecno Phantom 9 If you own Tecno Phantom 9 Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Tecno Phantom 9 lag or has an issue, then flash the Stock Firmware From the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Tecno Phantom 9.
Tecno Phantom 9 Run on android 9.0 OS Which is Powered by Mediatek MT6765 Processor. it is a Dual SIM (GSM) Smartphone that accepts Nano-SIM. Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.
The Device Come with 6GB of RAM and 128GB of Storage Can be Expandable via SD Card. In Camera Department it Come with 16+8+2MP Rear Camera with a 32MP Front Shooter.
Note:
- flashing the ROM will erase all Your Personal data Including storage. so we advice You to First Make a complete backup of your Phone.
- Please do carefully, we are not responsible for any damage to your device.
- Must backup NVRAM using this guide before doing anything.
- Ensure that Your Device at-least 50% charge during flashing Process to Prevent accidental Shut Down.
Must Require:
Firmware Information:
Product name: Tecno Phantom 9
Type: Full ROM
Size: up to 1.2GB
SoC: Mediatek MT6765
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Product Version: AB7-H618A-P-190419V148
Download Links:
Flash Tools:
Driver:
- Mediatek Preloader V-COM Driver Here
How to Install Stock Firmware Flash Tecno Phantom 9:
- First of all Download and Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools Inside a Folder. Run SP Flash tools.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it ON
How to Flash using Tecno Flash tools
- Download & Extract Firmware
- Download & Extract tecno flash tool
- Install Mediatek VCOM driver on Computer
- open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your Switched of phone to Computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it on.
Read also:
- How to unlock Bootloader
- How to Repair IMEI Number
- Google Camera 6.1 Working HDR Plus Portrait Mod Slow Motion
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.