Đánh giá chi tiết hướng dẫn sử dụng Insignia NS-BIPCD01 Boom Box

Hướng dẫn sử dụng Insignia NS-BIPCD01 Boom Box: Một đánh giá #Insignia #NSBIPCD01 #BoomBox #UserManual #PackageContents #iPodDock #CD #ACPowerAdapter #QuickSetupGuide #MadeForiPod #MadeForiPhone #Apple #PerformanceStandards #WirelessPerformance #PowerSupply #Batteries #BatteryCompartment #Polarity #ACPowerAdapter #PowerOutlet #PoweringOn #PoweringOff #VolumeControl #ExternalAudioDevice #AUXINJack #Headphones #HighVolume #Radio #LCDdisplay #FMmode #Tuning #AutoTuning #ManualTuning #PresetStations #CompactDiscs #CDmode #NoDisc #CDDoor #TOC #Playback #Pause #Stop #iPod #iPhone #PlaybackFiles #FCCPart15 #HarmfulInterference #ClassBDigitalDevice #RadioCommunications #CanadaICES003 #Warranty #CustomerService #RegisteredTrademark

Hướng dẫn sử dụng Insignia NS-BIPCD01 Boom Box

Gói hàng bao gồm

– Loa boom với đế iPod/CD
– Bộ chuyển đổi nguồn AC
– Hướng dẫn cài đặt nhanh
– Dành cho iPod” và “Dành cho iPhone” có nghĩa là một phụ kiện điện tử được thiết kế để kết nối riêng với iPod hoặc iPhone, và đã được chứng nhận bởi nhà phát triển để đáp ứng các tiêu chuẩn hiệu suất của Apple. Apple không chịu trách nhiệm về việc vận hành của thiết bị này hoặc việc tuân thủ các tiêu chuẩn an toàn và quy định. Vui lòng lưu ý rằng việc sử dụng phụ kiện này với iPod hoặc iPhone có thể ảnh hưởng đến hiệu suất không dây. Trước khi sử dụng sản phẩm mới của bạn, hãy đọc các hướng dẫn này để tránh gây hỏng hóc bất kỳ thiết bị nào.

Chức năng nụt

Hãy đảm bảo rằng nắp latch được đặt chẵn chắn. Khi thay thế pin, hãy đảm bảo rằng bạn thay thế tất cả cùng một lúc và với cùng một loại pin. Nếu sản phẩm không sử dụng trong một khoảng thời gian dài, pin nên được tháo ra để ngăn chặn bất kỳ hỏng hóc nào có thể gây ra cho sản phẩm từ rò rỉ ăn mòn sẽ làm hỏng bảo hành. Khi pin đạt 20% dung lượng, biểu tượng pin yếu sáng nhấp nháy để thông báo bạn thay pin.

Sử dụng AC

Cắm một đầu bộ chuyển đổi nguồn AC vào cổng DC 9V bên sau của chiếc loa boom của bạn. Cắm đầu còn lại vào ổ điện AC. Bật máy của bạn nhấn nút POWER để bật loa boom. Nhấn POWER một lần nữa để tắt loa boom khi kết thúc việc nghe nhạc.

Điều khiển âm lượng

Nhấn các nút VOLUME +/- để đạt mức âm lượng mong muốn. Nghe từ một thiết bị âm thanh ngoại vi Sử dụng một cáp âm thanh với cắm stereo 3.5 mm (không được cung cấp), kết nối thiết bị âm thanh ngoại vi với cổng AUX IN ở bên sau của loa boom của bạn. Nhấn liên tục nút SOURCE cho đến khi AUX xuất hiện trên màn hình. Âm thanh phát qua loa. Sử dụng tai nghe

Sử dụng tai nghe có cắm 3.5 mm (bạn có thể cần mua một adapt…

Nguồn: https://manual.queenmobile.net/insignia-ns-bipcd01-boom-box-user-manual-a-review.html?utm_source=rss&utm_medium=rss&utm_campaign=insignia-ns-bipcd01-boom-box-user-manual-a-review

#Insignia #NSBIPCD01 #BoomBox #UserManual #PackageContents #iPodDock #CD #ACPowerAdapter #QuickSetupGuide #MadeForiPod #MadeForiPhone #Apple #PerformanceStandards #WirelessPerformance #PowerSupply #Batteries #BatteryCompartment #Polarity #ACPowerAdapter #PowerOutlet #PoweringOn #PoweringOff #VolumeControl #ExternalAudioDevice #AUXINJack #Headphones #HighVolume #Radio #LCDdisplay #FMmode #Tuning #AutoTuning #ManualTuning #PresetStations #CompactDiscs #CDmode #NoDisc #CDDoor #TOC #Playback #Pause #Stop #iPod #iPhone #PlaybackFiles #FCCPart15 #HarmfulInterference #ClassBDigitalDevice #RadioCommunications #CanadaICES003 #Warranty #CustomerService #RegisteredTrademark #Download
Title: A Comprehensive Guide to Operating the Insignia NS-BIPCD01 Boom Box

Introduction:
The Insignia NS-BIPCD01 Boom Box is a powerful audio device that guarantees an immersive music experience. To ensure you make the most of its amazing features, this comprehensive user manual will guide you through the operations and functionalities of the NS-BIPCD01 Boom Box.

Image: [Insert image of Insignia NS-BIPCD01 Boom Box]

Section 1: Unboxing and Setup
Upon receiving your NS-BIPCD01 Boom Box, carefully unbox it and follow these steps to correctly set it up:
1. Connect the power cord to an electrical outlet and the boom box’s power input.
2. Insert batteries (not included) if you prefer to use the boom box wirelessly.
3. For enhanced audio quality, connect the boom box to an external audio source using the available input options.
4. Familiarize yourself with the control buttons and their corresponding functions.

Section 2: Basic Operations
Master the essential features of the NS-BIPCD01 Boom Box by understanding these basic operations:
1. Power On/Off: Press the power button to turn the boom box on or off.
2. Volume Control: Adjust the volume to your desired level using the volume control buttons.
3. Track Selection: Use the skip forward and skip backward buttons to navigate through tracks or radio stations.
4. Play/Pause: Press the play/pause button to initiate or pause audio playback.

Section 3: CD and MP3 Playback
Learn how to enjoy your favorite music via CDs or MP3 files with the NS-BIPCD01 Boom Box:
1. CD Playback:
a) Gently insert the CD into the designated slot.
b) Use the track control buttons to select specific tracks.
c) Enjoy the music through the built-in speakers or connect headphones, if desired.
d) Press the eject button to remove the CD safely.
2. MP3 Playback:
a) Connect your external device (e.g., smartphone or MP3 player) using the provided auxiliary input.
b) Use the boom box controls to navigate and select MP3 files.
c) Adjust volume and enjoy your personalized music playlist.

Section 4: Radio Functionality
With the NS-BIPCD01 Boom Box, you can tune in to your favorite radio stations effortlessly:
1. Set the correct radio frequency range (AM/FM).
2. Use the tuning dial/buttons to scan through available stations.
3. Once tuned to your desired station, optimize the sound quality using the built-in equalizer settings.

Section 5: Maintenance and Care
To ensure your NS-BIPCD01 Boom Box functions optimally for an extended period, follow these maintenance guidelines:
1. Clean the exterior surfaces with a soft cloth to remove dust or fingerprints.
2. Regularly clean the CD player lens using a cleaning kit to maintain optimal playback performance.
3. Store the boom box in a clean, dry place when not in use to prevent damage.

Conclusion:
We hope this user manual has provided you with a comprehensive understanding of the Insignia NS-BIPCD01 Boom Box’s operation and functionalities. By following these instructions, you can fully immerse yourself in exceptional audio experiences. Explore and enjoy your favorite music to the fullest with this remarkable audio device. Happy listening!

Insignia NS-BIPCD01 Boom Box User Manual

Package contents

• Boom box with iPod Dock/CD
• AC power adapter
• Quick Setup Guide

Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an iPod or iPhone may affect wireless performance. Before using your new product, please read these instructions to prevent any damage.

Features

Front

Back 

Bottom

Introduction
Please read these instructions carefully before using this product and retain them in a safe place for future reference.

Power supply
This product can be powered by either the included AC power adapter (100/240V, 50-60Hz), or by six “C” size alkaline batteries.

Using batteries

1. Open the battery compartment at the bottom of your boom box.
2. Insert 6 “C” size alkaline batteries (not supplied) into the battery compartment, observing the correct polarity as indicated inside the battery compartment. 3
3. Close the battery compartment.

Notes: Ensure the compartment cover is securely fitted. When you replace the batteries, make sure you replace them all at the same time and with the same type of battery. If the product is not to be used for an extended period of time, the batteries should be removed to prevent any possible damage to the product from corrosive leakage which will invalidate the warranty. When the batteries reach 20% of capacity, a low battery icon flashes to let you know to change batteries.

Using AC

1. Plug one end of the AC power adapter into the DC 9V jack on the back of your boom box.
2. Plug the other end into an AC power outlet.

Powering your boom box

1. Press the POWER button to turn the boom box ON.
2. Press POWER again to turn the boom box OFF when finished listening.

Controlling the volume
Press the VOLUME +/- buttons to the desired level.

Listening to an external audio device

1. Using an audio cable with a 3.5 mm stereo plug (not provided), connect the external audio equipment to the AUX IN jack on the back panel of your boom box.
2. Repeatedly press the SOURCE button until AUX appears in the display. Audio plays through the speakers.

Using headphones
Use headphones with a 3.5 mm plug (you may need to buy an adapter if your headphones are different). The speakers are automatically switched off when the headphones are being used. Caution: Listening to high-volume sound for long periods of time can damage your hearing.

Listening to the radio

1. Press the POWER button to turn the boom box ON. The LCD display turns on.
2. Repeatedly press the SOURCE button until the FM mode is selected.
   Example: FM mode
   
3. Press thebuttons to tune to the desired station.
   Auto Tuning Press thebuttons momentarily and release. The tuner will move up or down by 0.2 MHz continually until stops at the next/previous existing station.
   Manual Tuning Press and hold thebuttons until the display approaches your desired station. Tap the buttons repeatedly until the display shows the exact frequency.
4. When you have finished listening, press the POWER button to turn the boom box OFF.

Storing preset stations

The unit enables you to program 10 stations of FM band.

1. Tune to the station you wish to store by pressing thebuttons.
   
2. Press the MEMORY button once.
   
3. Press the PRESET button repeatedly to set the desired preset station number
   
4. Press the MEMORY button again. The station is stored on channel 3
   
5. To store other stations, repeat the above steps.
   RECALLING PRESET STATION
   Press the PRESET button repeatedly to select the desired station.

Playing Compact Discs

1. Press the POWER button to ON.
2. Repeatedly press the SOURCE button to select CD mode. CD READ flashes in the display.
3. If there is no disc inside, “NO DISC” is displayed.
   When there is no disc
   

To load a disc

1. Lift up the CD door.
2. Load a disc inside and then close the CD door. After that, the reading disc will start. Note: Ensure the disc is pushed fully and locked in place.

After reading TOC

To play the Disc
In CD stop mode, press PLAY/PAUSE to play the CD

To pause the disc playing Press the PLAY/PAUSE button while the disc is playing. Press it again to resume playing.

To stop disc playing
Press the STOP button.
Stop display

iPod/iPhone operation

Insert the iPod/iPhone
Insert the iPhone or iPod firmly in the compartment.

Playback iPod/iPhone files

1. Press the POWER button to ON.
2. Repeatedly press the SOURCE button to select iPod mode. The display shows the following.
   If there are files of proper format on your iPod/iPhone playback will start from where playback was last stopped or paused. If there are no files of proper format on your iPod/iPhone, the following symbols will appear on the display:
3. Press the PLAY/PAUSE button to begin playback. Note: When the unit is playing in iPhone mode and you receive a call, it stops playback and you hear the iPhone ringtone through your boom box.
4. To pause the playback, press the PLAY/PAUSE button. To resume playback, press the PLAY/PAUSE button again. Note: To stop playback, press the PLAY/PAUSE button, the STOP button does not function in the iPod/iPhone mode.

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.

90-day limited warranty. Visit www.insigniaproducts.com for details. For customer service, call: 877-467-4289 (U.S./Canada markets). We’re here for you at www.insigniaproducts.com. INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2013 BBY Solutions, Inc. All Rights Reserved.

REFERENCE LINK

https://www.insigniaproducts.com/search?query=NS-BIPCD01

DOWNLOAD LINK

Insignia NS-BIPCD01 Boom Box User Manual

Post Views:
5