TOP 10 BÁN CHẠY
Theo tuần và theo tháng
Theo tuần và theo tháng
Thủ tục nhanh, đơn giản
Nhanh chóng, dễ dàng
Khui hộp, đánh giá, tin mới…
Hãy tìm hiểu về sản phẩm loa vệ tinh JBL Professional Control 52-WH! Với điện áp sắp xếp là 110V, trở kháng 16 Ohms và dải tần từ 140 Hz đến 20 kHz, sản phẩm này thật sự đáng để sở hữu. Thiết kế thời trang và không quá phô trương, Control 52-WH thích hợp […]
Thông tin sản phẩm:
Thương hiệu: JBL Professional
Barcode:
6.481.200₫ 5.401.000₫
Giao hàng tân nơi, miễn phí giao hàng toàn quốc
Bạn vui lòng nhập đúng thông tin đặt hàng gồm: Họ tên, SĐT, Email, Địa chỉ để chúng tôi được phục vụ bạn tốt nhất !
Thông tin sản phẩm:
Thương hiệu: JBL Professional
Barcode:
Loa vệ tinh có loa siêu trầm tích hợp JBL Professional Control 52-WH, Màu trắng, Bán theo cặp.
• Wall-mount brackets included• 16 Ohms impedance and 140 Hz – 20 kHz frequency range• Stylish, unobtrusive design fits into a wide variety of decors• Ability to intermix with JBL Control 42C in-ceiling and JBL Control 62P pendant satellite speakers• See the JBL Control 50S/T Surface-Mount Subwoofer for subwoofer base, or the JBL C50Pack for the complete speakers + sub system
The stylish Control 52-WH satellite loudspeaker produces superb high fidelity sound via a low-distortion 60 mm (2½in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis. The Control 52-WH works with 70/100V distributed lines and low impedance systems for terrific versatility.
The 150-Watt (600-Watt peak) Control 50S/T-WH subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
A cover over the Control 50S/T-WH terminal cup keeps wiring neat. The Control 50S/T-WH is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52-WH satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.
The stylish Control 52-WH satellite loudspeaker produces superb high fidelity sound via a low-distortion 60 mm (2½in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allow seach speaker to be angled up to 45° off-axis.
JBL Professional Control 52-WH | JBL Professional Control 50S/T-WH | JBL Professional C50PACK-WH | |
---|---|---|---|
Product type | Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System | Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System | Packaged Surface-Mount Subwoofer-Satellite Loudspeaker System |
Power Rating | 50-Watts Continuous Program Power (2 hrs) 25-Watts Continuous Pink Noise (2 hrs) 30-Watts Continuous Program Power (100 hrs) 15-Watts Continuous Pink Noise (100 hrs) | 300-Watts Continuous Program Power (2 hrs) 150-Watts Continuous Pink Noise (2 hrs) 200-Watts Continuous Program Power (100 hrs) 100-Watts Continuous Pink Noise (100 hrs) | 200-Watts Continuous Program Power (100 hrs) 100-Watts Continuous Pink Noise (100 hrs) |
Transformer Taps | N/A | 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru | 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 ohms on switch to indicate subwoofer impedance |
Sensitivity (1W, 1m) | 85 dB (4.0V/1m = 1W), 82 dB (2.83V, 1m) | 95 dB (near corner), 89 dB (center of wall) | System: 87 dB with 4 satellites 85 dB with 2 satellites (depends on subwoofer boundary loading, see application note) |
Maximum SPL (1m) | 94 dB average, 100 dB peak | 115 dB average, 121 dB peak (near corner) 109 dB average, 115 dB peak (center of wall) | System: 107 dB with 4 satellites, continuous (113 dB peak) 105 dB with 2 satellites, continuous (111 dB peak) (depends on subwoofer boundary loading, see application note) |
Impedance | 16 ohms | 8 ohms (in bypass/thru mode) | 4 ohms with 4 satellites, 8 ohms with 2 satellites |
Input Connectors | Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) | Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2) | Removable locking 2-pin connectors with screw-down terminals. |
Frequency Response (±3 dB) | 180 Hz – 17 kHz | 50 Hz – 150 Hz | 50 Hz – 17 kHz |
Dimensions (H x W x D) | 4.5″ x 3.3″ x 3.75″ (115 x 84 x 96 mm) | 14″ x 15.4″ x 8″ (356 x 391 x 203 mm) ) | See Control 52 (4) and Control 50S/T (1) |
Weight | 1.5 lbs (0.7 kg) Each | 20 lbs (9 kg) | 26 lbs (11.8 kg) |
The product voltage arrange is 110V
Thương hiệu |
---|
Trả trước: 4.499.600₫
Đánh giá
Chưa có đánh giá nào.