- Cơ hội có 1 không 2, top 5 nồi cơm giảm tới 25% mua tặng vợ 20/10
- Cách chụp màn hình Samsung chỉ với 1 nút nhấn
- Top 5 máy lạnh 1.5 HP dưới 10 triệu giá tốt
- 4 mẹo hâm nóng cơm nguội ngon như mới nấu
- Giảm giá bán iPhone 5S mua ngay kẻo lỡ
- Hướng dẫn sử dụng bảng điều khiển máy giặt LG WF-D2017HD 20 Kg
- Microsoft phát hành công cụ phục hồi cho Surface Book, Surface Pro 4
- Laptop tầm giá 6 triệu, nâng cấp được Windows 10 và thoải mái học tập
- Đánh giá Tivi LED Sony KDL32R300B – tuyệt đỉnh 32 inch
- Trị sạch mụn, thật đơn giản chỉ bằng việc uống nước nóng hàng ngày
Avvio 787 USB Drivers (TẢI VỀ) 📱🖥️ 📱🖥️
Bạn gặp khó khăn khi kết nối điện thoại Avvio 787 với máy tính? Máy tính Windows không nhận ra điện thoại Android Avvio 787? Điều này có thể là do thiếu hoặc hỏng hóc driver trên máy tính của bạn. Để khắc phục Avvio 787 không xuất hiện trên máy tính, hãy tải về Avvio 787 USB Drivers và cài đặt chúng trên máy tính của bạn. Avvio USB Drivers là điều cần thiết để thiết lập kết nối ổn định giữa máy tính và điện thoại qua cổng USB. Nếu bạn đang tìm kiếm Avvio 787 USB drivers cho Windows 11, Windows 10, Windows 7, Windows 8.1 và Windows 8, bạn có thể tải chúng từ phần tải về ở dưới đây. Trên trang này, chúng tôi đã chia sẻ các bản OEM USB Drivers chính thức cho Avvio 787 cùng với các driver giao diện ADB và driver Fastboot. Avvio 787 Android USB Drivers giúp kết nối điện thoại của bạn một cách an toàn như một thiết bị USB MTP (Media Transfer Protocol) và chuyển tệp và dữ liệu như hình ảnh, video và tài liệu giữa điện thoại và máy tính hoặc laptop. Nếu bạn đang gặp vấn đề với việc truyền tệp Android không hoạt động, thì nên cài đặt Avvio 787 drivers trên máy tính của bạn. Driver ADB và Fastboot của Avvio 787 cho phép bạn truyền lệnh ADB và lệnh Fastboot từ máy tính của bạn và thực hiện các hoạt động cụ thể trên điện thoại của bạn. Tải về Avvio 787 USB Driver Các driver điện thoại Avvio được cung cấp ở đây cho phép bạn chạy firmware stock, recovery stock, recovery TWRP, recovery CWM, mở khóa bootloader, vv. Nó cũng cho phép bạn chuyển phương tiện, tài liệu và các tệp khác giữa điện thoại và máy tính. Avvio 787 CDC Driver để chạy Firmware Tải Ngay Bây giờ Hướng dẫn cài đặt: Theo dõi Hướng dẫn Avvio 787 VCOM Driver để chạy Firmware Tải Ngay Bây giờ Hướng dẫn cài đặt: Theo dõi Hướng dẫn Avvio 787 USB Driver để kết nối thông thường với PC Tải Ngay Bây giờ Hướng dẫn cài đặt: Theo dõi Hướng dẫn Các driver Fastboot và ADB Avvio 787 có thể tải về dưới đây. Avvio 787 ADB và Fastboot Drivers Tải Ngay Bây giờ Hướng dẫn cài đặt: Theo dõi Hướng dẫn [!] Lưu ý: Nếu bạn gặp lỗi Chữ ký Driver khi cài đặt USB Driver, thì hãy xem video này để khắc phục vấn đề. Cũng Tải Về: Avvio 753 Claro USB Drivers Cách Cài Đặt Avvio 787 CDC Drivers Tải và giải nén tệp android-cdc-driver.zip trên máy tính của bạn. Mở Device Manager trên máy tính của bạn bằng cách nhấp chuột phải vào nút Bắt đầu Windows và chọn Device Manager. Khi Device Manager tải, nhấp vào tên Máy tính của bạn. Tiếp theo, nhấp vào Hành động và sau đó chọn Thêm phần cứng lỗi thời. Cửa sổ Thuật sĩ Thêm Phần Cứng bây giờ nên mở. Nhấp vào Tiếp theo để tiếp tục. Bây giờ chọn Cài đặt phần cứng mà tôi tự chọn thủ công từ danh sách (Nâng cao) và nhấp vào Tiếp theo. Trong cửa sổ tiếp theo, chọn Hiển thị Tất Cả Thiết Bị từ danh sách và nhấp vào Tiếp theo. Bây giờ nhấp vào Có Đĩa… để mở cửa sổ Cài Đặt Từ Đĩa. Nhấp vào Duyệt… và dẫn dẫn đến thư mục nơi bạn đã giải nén các driver CDC Android ở Bước #1. Bây giờ chọn tệp Android_Gadget_CDC_driver.inf và nhấp vào Mở và sau đó là OK. Chọn Driver VCOM Gadget Android từ danh sách và nhấp vào Tiếp theo. Xác nhận trình điều khiển Phần cứng để cài đặt và nhấp vào Tiếp theo để bắt đầu quá trình cài đặt. Khi cài đặt xong, nhấp vào Hoàn Thành. Làm Theo Các Bước #3 đến #13 một lần nữa và cài đặt Gadget Serial, MediaTek PreLoader USB VCOM (Android) và MediaTek USB Port drivers. Khi tất cả các driver liệt kê đã được cài đặt, khởi động lại máy tính của bạn. Cách Cài Đặt Avvio 787 VCOM Drivers Tải và giải nén tệp Driver VCOM Android mới nhất (android-vcom-driver.zip) vào Desktop trên máy tính của bạn. Bây giờ mở Device Manager trên máy tính của bạn bằng cách nhấp chuột phải vào Nút Bắt Đầu Windows và chọn Device Manager. Bây giờ nhấp vào tên Máy tính của bạn trong cửa sổ Device Manager. Bây giờ nhấp vào Hành động và sau đó nhấp vào Thêm phần cứng lỗi thời. Cửa sổ Thuật sĩ Thêm Phần Cứng bây giờ nên mở. Nhấp vào Tiếp theo để tiếp tục. Chọn Cài đặt phần cứng mà tôi tự chọn thủ công từ danh sách (Nâng cao) và nhấp vào Tiếp theo. Chọn Hiển thị Tất Cả Thiết Bị từ danh sách và nhấp vào Tiếp theo. Trong cửa sổ tiếp theo, nhấp vào Có Đĩa… để mở cửa sổ Cài Đặt Từ Đĩa. Trong cửa sổ Cài Đặt Từ Đĩa, nhấp vào Duyệt… và dẫn dẫn đến thư mục nơi bạn đã giải nén các driver ở Bước #1. Bây giờ mở thư mục Win 7 và chọn tệp driver usb2ser_Win764.inf nếu bạn có phiên bản 64 bit của Windows, nếu không hãy chọn tệp usb2ser_Win7.inf nếu bạn có phiên bản 32 bit của Windows. Khi đã chọn, nhấp vào Mở và sau đó là OK. Bây giờ chọn cổng MediaTek DA USB VCOM từ danh sách và nhấp vào Tiếp theo. Xác nhận trình điều khiển phần cứng để cài đặt và nhấp vào Tiếp theo để bắt đầu quá trình cài đặt. Khi cài đặt xong, nhấp vào Hoàn Thành. Làm Theo Các Bước #3 đến #13 một lần nữa và cài đặt cổng MediaTek Preloader USB VCOM, cổng MTK USB Debug, cổng MTK USB Modem và cổng MTK USB khác. Sau khi tất cả các driver được liệt kê được cài đặt, khởi động lại máy tính của bạn. Cách Cài Đặt Avvio 787 USB Drivers Thủ Công Tải về tệp latest_usb_driver_windows.zip trên máy tính của bạn và giải nén nó trên Desktop. Mở Device Manager trên máy tính của bạn bằng cách tìm kiếm device manager từ Menu Bắt Đầu Windows. Bây giờ nhấp vào tên máy tính của bạn trong cửa sổ Device Manager. Bây giờ nhấp vào Hành động và sau đó chọn Thêm phần cứng lỗi thời. Cửa sổ Thuật Sĩ Thêm Phần Cứng nên mở, nhấp vào Tiếp theo để tiếp tục. Chọn Cài đặt phần cứng mà tôi tự chọn thủ công từ danh sách (Nâng cao) và nhấp vào Tiếp theo. Chọn Hiển thị Tất Cả Thiết Bị từ danh sách và nhấp vào Tiếp theo. Trên màn hình tiếp theo, nhấp vào Có Đĩa… để mở cửa sổ Cài Đặt Từ Đĩa. Nhấp vào Duyệt… và dẫn dẫn đến thư mục nơi bạn đã giải nén các driver ở Bước #1. Bây giờ chọn tệp android_winusb.inf và nhấp vào Mở và sau đó là OK. Chọn trình điều khiển Android ADB Interface từ danh sách và nhấp vào Tiếp theo. Xác nhận trình điều khiển phần cứng để cài đặt và nhấp vào Tiếp theo để bắt đầu quá trình cài đặt. Khi cài đặt xong, nhấp vào Hoàn Thành. Làm theo các bước #3 đến #13 một lần nữa và cài đặt trình điều khiển Giao Diện Bootloader Android và trình điều khiển Giao Diện ADB Composite Android. Khi tất cả các driver được liệt kê đã được cài đặt, khởi động lại máy tính của bạn. Hướng Dẫn Video: Cách Cài Đặt Avvio 787 Android USB Drivers Đăng Ký Theo Dõi Android USB Drivers Cách Cài Đặt Avvio 787 ADB và Fastboot Drivers Tải và giải nén 15 giây ADB installer trên máy tính của bạn. Bây giờ nhấp chuột phải vào tệp cài đặt driver adb (adb-setup.exe) và nhấp vào Chạy với quyền quản trị. Bây giờ cửa sổ dòng lệnh với một nền xanh và văn bản màu trắng nên mở. Nó nên hỏi bạn có muốn cài đặt ADB và Fastboot không? Nhấn phím Y trên bàn phím của bạn và Enter. Bây giờ nó sẽ hỏi bạn có muốn cài đặt ADB toàn hệ thống không? Một lần nữa nhấn phím Y và Enter. Bây giờ, quá trình cài đặt driver ADB và Fastboot nên bắt đầu. Khi hoàn tất, nó sẽ hỏi bạn có muốn cài đặt trình điều khiển thiết bị không? Nhấn phím Y và Enter. Bây giờ cửa sổ “Hướng dẫn Cài Đặt Trình Điều Khiển Thiết Bị” nên mở. Nhấp vào Tiếp theo để tiếp tục cài đặt Trình Điều Khiển USB Google (WinUSB). Khi cài đặt xong, nhấp vào Hoàn Thành và khởi động lại máy tính của bạn. Video Hướng Dẫn: Cách Cài Đặt Avvio 787 ADB và Fastboot Drivers Đăng Ký Theo Dõi Android USB Drivers Ghi Chú Quan Trọng: [*] Lỗi Chữ Ký Driver: Nếu bạn gặp Lỗi Chữ Ký Driver Trong quá trình cài đặt Driver thì xem Video này để sửa lỗi này. [*] Đường dẫn hỏng: Báo cáo ở đây. [*] Chúng tôi đã bỏ sót mẫu thiết bị nào chưa? Hãy cho chúng tôi biết bằng cách liên hệ với chúng tôi qua trang Liên Hệ Với Chúng Tôi. #Avvio787 #USBDrivers #AndroidDrivers #Avvio #TảiVề #CàiĐặtDriver #ADB #Fastboot
Avvio 787 phone having difficulty connecting to a computer? Windows computer not recognizing Avvio 787 Android Phone? It may be because of the missing or the corrupted drivers on your computer. To fix Avvio 787 not showing up on PC, download Avvio 787 USB Drivers and install them on your computer.
Avvio USB Drivers are a must to establish a stable connection between your computer and phone over USB. If you’re looking for Avvio 787 USB drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then you can download them from the downloads section below. On this page, we have shared official OEM USB Drivers for Avvio 787 along with ADB interface drivers and Fastboot drivers.
Avvio 787 Android USB Drivers help securely connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents to and from phone to computer or laptop. If you’re facing an Android file transfer not working issue, then it is recommended to install Avvio 787 drivers on your computer.
The Avvio 787 ADB driver and Fastboot driver allows you to pass ADB commands and Fastboot commands from your computer and perform certain operations on your phone.
Download Avvio 787 USB Driver
The Avvio Phone drivers offered here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It also allows you to transfer media, documents, and other files between your phone and computer.
Avvio 787 CDC Driver for Flashing Firmware
How to install: Follow Tutorial
Avvio 787 VCOM Driver for Flashing Firmware
How to install: Follow Tutorial
Avvio 787 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Avvio 787 Fastboot and ADB drivers can be downloaded below.
Avvio 787 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Avvio 753 Claro USB Drivers
How to Install Avvio 787 CDC Drivers
- Download and extract the android-cdc-driver.zip file on your computer.
- Open Device Manager on your computer by right-clicking the Windows Start Button and selecting Device Manager.
- Once the Device Manager loads, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- In the next screen, select Show All Devices from the list and click on Next.
- Now click on Have Disk… to launch Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the Android CDC drivers in Step #1.
- Now select Android_Gadget_CDC_driver.inf file and click on Open and then on OK.
- Select Android Gadget VCOM Driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
- Once all the listed drivers are installed, reboot your computer.
How to Install Avvio 787 VCOM Drivers
- Download and extract the latest Android VCOM Driver (android-vcom-driver.zip) file to Desktop on your computer.
- Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- In the next screen, click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. When selected, click on Open and then on OK.
- Now select the MediaTek DA USB VCOM Port from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
- Once all the listed drivers are installed, restart your computer.
How to Install Avvio 787 USB Drivers Manually
- Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
- Open the Device Manager on your computer by searching device manager from Windows Start Menu.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then select Add legacy hardware.
- Add Hardware Wizard window should open, click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- On the next screen, click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, restart your computer.
Video Tutorial: How to Install Avvio 787 Android USB Drivers
Subscribe to Android USB Drivers
How to Install Avvio 787 ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer.
- Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
- Now a command prompt window with a blue background and white text should open.
- It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB driver and Fastboot driver installation process should begin.
- When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
- Now the “Device Driver Installation Wizard” window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and reboot your computer.
Video Tutorial: How to Install Avvio 787 ADB and Fastboot Drivers
Subscribe to Android USB Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.